Woodworking tools for sale - tools - by owner - sale - craigslist (2024)

For security reasons, I am nervous about letting strangers into my home. Therefore, before you enter, I will take a picture of your driver’s license and auto license.
The pictures will be sent to someone else.

Cash only.

Brand new Rigid 2 speed Hammer Drill with 2 batteries in case. $275.
Brand new DeWalt 12-volt Drill in case. $95.
Brand new DeWalt corded portable orbital Jig Saw and many extra blades. Model DW 331 in case. $125.
Brand New DeWalt portable Sander
Brand New Woodpecker Precision Set (two triangles). $40.
Brand New Porter Cable dust collector model # 39690 for use with 5 ¾-inch diameter sub-base as found on models #100,
690,691, 693. $30.
Brand New Hitachi Pin Gun in case. $50.
Brand New Jacobs Power Collet fits Porter Cable model #690, 7529. Includes bushing for ¼-inch bit. $20.
Brand New Jacobs Power Collet fits Porter Cable model #690. Includes bushing for 1/4inch bit. $20.

Brand New Craftsman Nut Drivers: 1-inch standard socket, 6points, ½-inch drive; 1-inch standard socket, 6 points,
½- inch drive; 32mm socket, 12 points, ½-inch drive; 24mm socket, 12 points, ½-inch drive; Casco 15/16-inch,
12 points, ½-inch drive. $20 for all 5 or $5. each

Used nut drivers: standard length, 3 extended nut drivers, 2 spark plug adapters, 1 extension, 1 rachet handle. In a metal
case. $20.

Brand New Allied 58-piece Rachet Driver Power Bit set in case. $20.

BRAND NEW KREG POCKET HOLE TOOLS
Brand New Kreg Pocket Hole Clamp, quick release, 90-degree corner right angle clamp $30.
Brand New Kreg Micro face clamp/pocket hole clamp $15.
Brand new Kreg large locking C clamp $20.
Brand New Kreg Pocket Hole Starter Kit $18.
Brand New Kreg Introductory Pocket Hole Kit $35
Used Kreg ORIGIONAL pocket hole jig $25.
Used a 3-inch face C clamp/ locking C clamp/ pocket hole clamp $10
Brand New McFeely pocket hole screw starter kit $25.
Brand New Triton double mini pocket hole jig $10.

Brand New Bosch Colt 1 HP Palm Router, variable speed with Bosch Plunge Base for Colt Palm Router $200.
Brand New Kreg Precision Router Table Set up Bars in a case. $50.

BRAND NEW ROUTER BITS
Brand New Kreg Precision Router Table Set up Bars in a case. $50.
Brand new Sommerfeld 3-piece CMT router bits Raised Panel Set for ¾ to 7/8 stock, 1/2 -inch shank plus cushions for raised panel. $175
Brand New CMT 12-piece router bit advanced set, 1/4 -inch shank $225
Brand New Sommerfeld 4-piece Router Bit Set, round nose, ½-shank. $85.
Brand New Sommerfeld 4-piece Router Bit Junior Raised Panel Set, ½-inch shank. $110.
Used CMT 3-piece Router Bit Set for plywood, undersized, ½-inch shank. $35.
Brand New CMT 2-piece Router Bit Set, tongue and groove, ½-inch shank. $45.
Brand New CMT 5-piece Chamfer Bit Router set, ½-inch shank. $108.
Brand New CMT Router Bit Set, rabbeting with adjustable collars from 1/8-inch to ½-inch, 6 adjustments. One cutter plus 7 collars. $30.
Brand New Eagle America 5-piece Rabbet Router Bit Set, 1/2-inch shank. $65.
Used Freud 7-piece Rabbet Router Bit Set, ½ inch shank. $50.

Brand New Kreg In Line Clamp: Horizonal Bench Top Clamping. Easy Rotary-Dial Adjustment. $10.
Brand New MLCS Router Control, Variable Speed 15 amp. $10.
Brand New Air Switch Foot Pedal. $15.

Variety of carbide router bits, some new.

Black and Decker 10-inch RADIAL ARM SAW on a mobile custom-made table which has 1 drawer and a storage cabinet with doors. Accessories: 2 1/2-inch drum attachment, 8-inch sanding disc, 3/8-inch chuck, extra blade guard, hold downs, forest blade stablizer, Craftsman molding cutter set, rotary planer and extra knives, horizonal blade guard, spare electronic stop switch, Kreg precision stop system for repeated cuts, instruction manual. (SEE PICTURE) $450.

Craftsman 6-INCH BUFFER, benchtop,1/2-inch arbor, 1/2 HP continuous duty. Model# 351-226250. Includes spare wheels. (SEE PICTURE: it is to the left of the craftsman Radial Arm Saw.) $40.

Home-made WIRE BRUSH WHEELS for removing rust. Benchtop. Includes face protector and light. $10
.
Black and Decker WORKMATE TABLES: Larger table with accessory draw and accessories. $75; smaller table $25. (SEE PICTURE)

Delta STATIONARY DISC AND BELT SANDER with 9-inch disc/ 6-inch belt sander. Rockler miter gauge for sander included. Includes a mobile metal stand. (SEE PICTURE) $125.

Craftsman ½ HP BENCH TOP DISC/BELT SANDER, Belt 6-inch disc-Grinder/Sander, 1/2 HP, Belt tilt 0 degree
to 90-degree, Contour belt sander, Quick belt tension release, 2 tilt tables. (SEE PICTURE #24) $75.

Dremel BENCH TOP DISC/BELT SANDER, 120 volts, 60Hz, 2 amps, type 1-3450 rpm. Model#1731. (SEE PICTURE #24) $50.

3 WHEEL BAND SAW light and mobile table. Manual (SEE PICTURE) $100

Machinist VICE (SEE PICTURE #24) $20

Multigrinder: Small benchtop GRINDING WHEEL for SHARPENING. CP-5005; varispeed 0-10,000 rpm, 110-120 V, 120W. (SEE PICTURE with the Craftsman and Dremel disc/belt sanders #24) $20.

Grizzly BANDSAW
Grizzly 14-inch EXTREME Band Saw (model#G0555x) and table with built in light and factory rip fence which will aid in resaw. Also, a Carter aftermarket magnetic rip fence, Carter Quick Release blade changer and mobile base. Extra blades. Please note, the EXTREME version IS Grizzly’s TOP OF THE LINE 14-inch band saw. The value of the 2 Carter items which I am including is $323.73 (Carter magnetic rip fence at Amazon is $131.91. Carter products QR 1000 quick release band saw blade tension toggle at Amazon is $191.82).
Motor: 1-1/2 HP, 110v/220v (prewired 110v)
Full load amps: 15A ( 110V); 7.5A (220V)
Table size: 14" x 20-1/2"
Blade speeds: 3000 FPM
Blade length range: 92-1/2" to 93-1/2"
Blade width range: 1/8" to 3/4"
Max. cutting width left of blade: 13-1/2"
Max. cutting height: 6"
Table tilt: 10-degrees L/ 45-degrees R (SEE PICTURE) $950.

Craftsman 12-inch WOOD LATHE. The lathe has a vacuum attachment on it. (SEE PICTURE) $250.

12-inch Wood LATHE is attached to a METAL STORAGE TABLE which is 43 inches long by 19 inches wide by 32 inches high. It has a wooden top 54 inches long by 21 inches wide. 5 drawers on one side. The other side has a door cabinet with 4 shelves. The table is on a stand with wheels which lock. Table sold separately. (SEE PICTURE) $325

LATHE TOOL HOLDER (holds 9 tools) for wall mounting (SEE PICTURE) $35

LATHE TOOLS AND ACCESSORIES are new or almost new.
Robert Sorby Lathe Tools; ½ Spindle Gouge $22; ¾ -inch Continental Spindle Gouge $50; ½ -inch V groove turning tool $30.
Rockler 3-piece mini ergonomic carbide Lathe turning tools with replaceable tips plus wooden wall holder. $145.
Craftsman Lathe tools; 1-inch Bowl Gouge $20; ½-inch Round scraper $15; 1-inch Skew Gouge $20; ½-inch V groove
Spindle gouge $15.
Craftsman 8-piece wood turning set with a metal holder. $35.
One way Talon 4 jaw key operated self-centering scroll chuck. NEW $195.
Penn State Industries Jacobs 3 jaw chuck for lathe, ½-inch, 2M, including key. NEW $25.
Penn State Industries hand tightened 2M morse taper. $20.
3-piece spring caliper divider: inside/outside $10.
5-inch wood turning bowl caliper $12.
4-inch digital caliper (Harbor Freight0 $15.
6-inch digital caliper $20.
2-inch gouge – IT measuring tool $12.
2 precision compasses $5. each
Zero center finder to mark wood for turning $3.

Grizzly STONE VIKING WATER GRINDER 250 mm x 125mm (10-inch x 5-inch) for sharpening. (SEE PICTURE) $60.

Belt driven DENTAL TOOL FOR WOOD CARVING including a spare handpiece. Foot petal. (SEE PICTURE: to the right of the Grizzly EXTREME 14-inch band saw) $150.

Pittsburg 18 piece Offset Handle Ball Point and Hex Key Wrench Set (SEE PICTURE: to the left of the Grizzly
EXTREME 14-inch band saw) $15.

Kobalt cordless screwdriver including a set of 16 Ball Drivers in a Husky 15-inch x 8-inch x 8-inch toolbox which has one tray. $25.

Ryobi SCROLL SAW, light, extra blades, vacuum cleaner attachment, foot operated speed control, 16-inch throat, laminated wall mounted shelf with a drawer. (SEE PICTURE) $150.

Woodworking Apron- 4 pockets. (SEE PICTURE- hanging next to Ryobi Scroll Saw.) $3.

Mobile Clamp Rack about 5 feet high and multiple clamps: Bar, C, etc. (SEE PICTURE)

Ryobi DRUM OSCILLATING SPINDLE SANDLER and table with 16 new abrasive drums. (SEE PICTURE) $150.

Craftsman 10-INCH CONTRACTOR TABLE SAW with Biesemyer Rip Fence and Incra Precision Miter Gauge with extension. Includes Wixley Precision adjustable Rip Fence guide, emergency knee saw stop, extension table on right, extension table to rear of blade, large custom-made storage drawer attached to right tabletop extension which holds included accessories, one storage basket on right side of saw, one storage basket on left side of saw which also holds accessories. 2 free standing extension rollers for long boards. Also included: 2 Wixley digital angle gauges, digital saw height measuring gauge, Rockler magnet micro adjuster for rip fence, various pushers, 2 table inserts, one of which is a dado, 3 additional phenolic table inserts, a gauge-it angle miter, 1 blade lock tool for changing table blade, 1 universal feather board, 2 magnetic/oak hold downs with rollers, 1 pony kerf kepper, 1 wrench, craftsman universal jig, OEM original factory miter gauge, depth gauge, Rockler thin rip table saw jig, exact cut alignment tool, universal fence clamp, 2 guides for long angle cuts: one of which is a Rockler taper jig and the other is generic, Kreg rip guide, two extra 10-inch carbide tip blades, a carbide tip blade is on the saw, a lot of extra high speed steel blades (many of which have been sharpened), 4 extra jigs on a wall rack holder (remember to take them off the wall), storage rack (remember to take it off the wall), and instructional manuals. The table is on a custom-made HTC mobile base. If you were to purchase just three of the items which I am including their value would be $800 (Biesemeyer rip fence from Acme Tools $398.99, Incra Precision Miter Gauge from Amazon $256 and Wixley Saw Fence Digital Readout from Rockler $139.99). Please note, the original blade guard was removed (it is in the drawer) because the saw was used with an overhead vacuum. The table saw can be attached to a Grizzly central vacuum which is also for sale. (SEE PICTURE) $800.

Grizzly CENTRAL VACUUM (220 Volt) (SEE PICTURE) $300.
MICRO-JIG GRIPPER SET includes 2 grippers with 1 extra base, 1 extra leg, manual. $125.
CMT Dado Set; carbide tip, 5/8-inch arbor, 8-inch precision anti-kickback dado blade in a universal holder, $50.
Craftsman set of High-Speed Steel Dado Blades in a box. $25.
Electric plug which allows vacuum and saw to be activated at the same time. $20.

DUST COLLECTOR SYSTEMS
Grizzly CENTRAL VACUUM (220 VOLT) (SEE PICTURE) $300.
Edgewood Dustless Sanding System attaches to 4-inch dust collector hose. $20.
Vortex Dust Right - Dust separator plus harness by Rockler. Blue. (SEE PICTURE) $50.
Oneida Air Systems Dust Deputy, Deluxe All Clear Cyclone Separator. White. (SEE PICTURE) $65.
Porter Cable #39690 Dust Collector $30. Metal
Penn State Industries ceiling mount room dust collector/air filter. $75. (SEE PICTURE)
Magna Industries Sand and Kleen Jr. Features the Aquair Water Filters which captures microfine dry wall dust and suspends it in water. Protects your vacuum system. $20.

Delta 10-INCH MITER SAW and custom-made mobile table which has 2 drawers and a drop-down door shelf. (SEE
PICTURE) $100.

Craftsman SLIDING MITER SAW with shelf which attaches to wall. Instruction book. (SEE PICTURE) $100.

Nobex MITER SAW, HANDHELD, oversized; 22-inch blade; 2 extra blades: 630x40x0.8mm: CH 32 and CH 24 (SEE PICTURE). $75.

Jet MORTISING MACHINE with Bits and Sharpening Tool, Custom Table has 1 drawer, mobile stand. (SEE PICTURE) $250.

Planes: Variety of Wood Planes on custom built rack. All fully sharpened. 3 block planes $50 each, 2 router planes-
$75 for large manual router plane, $50 for smaller router plane. (SEE PICTURE: behind pic of Grizzly EXTREME
14 -inch band saw)
Custom built magnetic retained wall case to hold planes (SEE PICTURE: behind pic of Grizzly EXTREME 14-inch band
saw.) $75.

Pliers, metal rulers, T squares, vise grips, hand drills, wrenches, screw drivers, chisels.
Clamps; a large variety of C clamps, pipe clamps, bar clamps, etc. (SEE 2 PICTURES; hanging on clamp rack, behind a
router table plus I have clamps not in a pictures)
Wood and plywood
Wood clamps (SEE PICTURES; some hanging on clamp rack, some behind router table, some not in any pictures)

Craftsman extension air hose coiled in black container. $35.
Craftsman VERTICAL AIR COMPRESSOR, hoses, on wheels. 160 PSI (SEE PICTURE) $350.

ROUTER AND TABLE UNIT: Unit has a 3 HP, 5 speed Porter Cable Router Motor, side handled extra base, mounted on a Rebel cast aluminum router table. Motor is on a new INCRA Master Lift. Table has safety feature of hold down. Wired with an emergency stop. Includes rail coping sled, router depth gauge. This entire unit is attached to a custom-made mobile hardwood table (which holds plenty of storage) with raised panel doors and a smaller storage cabinet on the top. The smaller cabinet has 2 drawers on slides. One drawer has 52+ carbide bits (some new) of various profiles in individual holders. The other drawer holds misc. parts. It is finished with polyurethane clear and black epoxy paint. The Rebel Table is sold by Grizzly. (SEE PICTURE) $1,000.

ROUTER AND TABLE UNIT: Unit has a 2 ½ HP Porter Cable Router #6912 heavy duty motor and plunge router base. Unit is set up to use Jointtech System. Complete instructions, manual and instructional video included. Can be converted to standard use with no problem. Includes complete set of TEN ½-inch shank NEW CUTTERS, extra fence material, partially used lami-lube + 2 blade and bit cleaners, blanks for router table starting pin, parts for plunge router, parts for chuck cleaning, holders for homemade bit container, 2 edge guides, 2 bases: one side handle and one plunge router. Table has 6 drawers and 3 cabinets with doors, so it holds plenty of storage. (SEE PICTURE) $800.

Rockwell/Porter Cable Table Adapter Router table. This bolts to a table to accept your router. $5.
SOSS Invisible Hinge Router Guide-Installation Template $20.
Brass Guide Bushing set in a case $15.
Porter Cable Heavy Duty Router model 1002, with side handle base model 1001 $85
SOSS Invisible Hinge Router Guide Installation Template.

4-INCH HOBY CIRCULAR SAW with DC motor allowing variable speed with vacuum attachment and multiple accessories. Saw is attached to a custom-built wooden table with a drawer. Table has attached vacuum system. (SEE PICTURE) $300.

Craftsman 6-inch x ½ inch wheels HIGH SPEED GRINDER: 1/3 horsepower, ½ inch arbor. (SEE PICTURE) $75.
DeWalt Screwdriver bits. $10.

Ryobi Detail Biscuit Jointer/ BDJ 50. Mini Biscuit Cutter in case, including biscuits. $35.
Porter Cable Biscuit Cutter in case, including biscuits. $125.
Woodtek Heavy Duty pneumatic tacker and stapler. Model 0365 in case. $75.
Turner Pro 2 Solid oxygen Brazing/ Cutting/ Welding Torch model # PO-200. $20.
Wood tape Banding Machine $75.

Rigid 20-amp ½ inch drill and charger in a bag. $100.
Black and Decker Anniversary ½ inch 14.4-volt cordless drill in a bag. $50.
Craftsman 14.4-volt right angle NiMHi Batteries (NOT lithium) in a case. $50.
RYOBI ½ inch corded drill $35.
BOSCH 12-volt Nicad batteries drill in a case. $30.
Skil ½ inch Hammer drill and case $30.
Porter Cable ½ variable speed right angle drill in a case. $135
Misc. attachments for electric drill. Abrasive grinding stainless steel wire brushes plus 2 mandrels.
case included. $5.

Skil Jig Saw in a case. $30.
Grinder/Carver with flex shaft in case. $35.
Woodpecker saw gauge in case. $50.
3 Weller Soldering Irons in case. $75.
Porter Cable Finish Nailer in case. $50.
Porter Cable finish Nailer Model#250A. $50
ROTOZIP Spiral Cutter in case. $50

Craftsman Lazer Level in a case plus 60-inch tripod. $50.
Bernzomatic multipurpose cutting tool $2.
Black and Decker heat gun $10.
Drill Doctor Drill Bit Sharpener with case. Vintage model# 750. $40.
Drill Doctor Spade Bit Sharpener. $50.
AMT Dove tail joint cutting kit $50.

Porter cable 7 ½ inch portable circular saw in a case. $60.
Porter Cable Laminate Trim Kit in a case. $125.
Porter Cable Laminate Trimmer Model # 319. $50.
Porter Cable Variable Speed Tiger Saw Model 637 in case. $40
Dremel Saw Max in case plus miter cutting guide, $60.
Makita Portable Power Planer in case. $100.

SANDERS (other sanders may be scattered throughout the list)
Fein Profile Sander complete with all heads and case.
Fein Multi Master Kit, Model MSx636-1. Single sander: cutters Oscillating multi tool for cutting and sanding in case.
$150
Porter Cable right angle variable speed sander/polisher
Porter Cable Random 6-inch Orbital Sander in case. $100.
Porter Cable 2 1/2-inch x 14-inch compact Belt Sander in a case. Model#371. $50.
Black and Decker Belt Sander: 3-inch x 24-inch. $20.
Porter Cable Variable Speed Belt Sander 3-inch x 21-inch includes dust collector bag and extra belts. $100.
Ryobi 1/6 Sheet Sander. $15.
Porter Cable 1/2 Sheet Finishing Sander including dust collector which can be attached to a vacuum and extra sanding pads. $100.
Porter Cable 1/4 Sheet Finishing Sander. $25.
Ryobi 1/4 Sheet Sander. $22.
Porter Cable Profile Sander in case. $50.
Black and Decker Portable Sander
Porter Cable Random Orbit Sander. $25.
DeWalt Variable Speed Orbital Sander Kit with bag. $50.
Rockwell Random Orbital Sander, $20.
Sanding Sitter for an Orbital Sander, $4.
Ryobi Detail Sander. $5.
Black and Decker Quantem Sander. $20.

Harbor Freight Central Pneumatic Mini Orbital Sander, compact 2-inch sanding pad with 90 degree offset for tight fit.
15000 RPM; Item# 83828 $15.
Harbor freight Central Pneumatic Air Orbital Jitterbug Sander. Speed 9400 orbits per minute; air inlet 1/4-inch - 18 NPT;
weight 4.10 lbs,; hose size 3/8 inch; pad 6 1/2-inch x 3 1/2-inch; Item# 90115; $20.
Harbor Freight Central Pneumatic Professional 6-inch Orbital Composite Sander. 14 CFM @ 90 PSI; Item# 65173 $15.

Harbor Freight Central Pneumatic High Speed Air Body Saw $15.

PAINT TOOLS
Mixing Mate by Rockler: Replaces lid to a quart paint can with built-in mixing paddle. (SEE PICTURE: box next to the Nobex Miter Saw.) $12.
Wagner Paint Spray Gun. Make sure you take the box with the parts. $35.
Badger Detail Paint Touch-Up Gun. Model 400-2 Medium. $5.
Metal Fireproof Container for rags $35.
Earlex Spray Station with 2 guns and cleaning kit. $100.
GREX Tritium Airbrush Combo Kit. $220.
Homeright Paint Spray Shelter (tent to be put on table). $20.
Micro-Mark fold-up spray booth for air brushing. $65.
Homemade small air compressor for airbrushing. Free
Harbor Freight Central Pneumatic Professional Adjustable Mini Detail Spray Gun. Comes with cleaning brush and
wrench. Item# 92126. $8.

Harbor Freight Central Pneumatic Professional Adjustable Mini Detail Spray Gun. Comes with cleaning brush and
wrench. Item# 92126. $8.

Harbor freight Central Pneumatic Professional HVLP gravity feed spray gun. air pressure 15-50PSI; air flow: 9.5 to 14.8
CFM; cup size 28 oz; material output 1 to 3 cu. in; nozzle size 1.4 mm; air inlet 1/4-inch NPS. Item# 43430 $15.

Harbor Freight Central Pneumatic HVLP touch up spray gun, 120 cc gravity feed cup; .8 mm nozzle; 3.2-5.6 CFM @ 40
PSI; Item# 61473 $15.

Central Pneumatic HVLP Detail Air Spray Gun. Operating PSI: 43; CFM 3.7; air inlet: 1/4 NPS; cup capacity 5.3 oz; 40
cc/min capacity; pressure 10 PSI; Item# 46719 $10. $10.

Harbor Freight Gravity Spray gun stand. Item# 34958 $15.
Wagner HVLP Conversion Paint Gun. Contractor Series. This goes on a standard air compressor. $135.

Porter Cable Templet Guide Kit No 42000. $15.
Generic Temple Guide Kit. $15.
MVP Pro-Tec Mini air compressor; 250 P.S.T, 20 volts DC, 250 lbs./plug $5.
Dove Tail Kit $75.

Fostner drill press bits. 16-piece complete set with from ¼-inch to 2 1/8-inch by 1/8-inch increments. Case included. $35.
Fostner drill press bits. 8-piece complete set of 6 from 2 ¼ inch to 3 1/8-inch. Case included. $45.
Fostner Bit Sharpening Kit with box. $15.
Flaring Tool $5.

Lenox Hole Saw Kit: 16-piece set: 12 cutters plus attachments $35.
Hole Saw. $20.

GARAGE CABINET: Black metal, 14 drawers, 2 shelves. (58-inches high, 43-incges wide, 18-inches deep). On wooden mobile platform. (SEE PICTURE) $250.

SHELVING UNIT: Free standing; 52-inches high, 35-inches wide, 14-inches deep; 4 shelves; commercial grade, heavy duty steel wire; silver. (SEE PICTURE: next to garage cabinet you see a corner of the shelves) $35.

Wooden Platform (2 feet x 4 feet) with wheels. Good for holding and moving heavy objects. $5.

WALL CABINET: gray metal; 30-inches wide; 24-inches high; 11-inches deep; 2 doors- each door has 3 shelves 5 1/4-inches deep; back wall has pegboard holes; $25.

WOOD FLOOR CABINET: 28-inches wide, 42 1/2-inches high, 10-inches deep; 3 draws 4 1/2 x 2 1/2 x 8 1/4 inches; 3
adjustable shelves behind 2 doors; pegboard back; (SEE PICTURE; top part of this brown cabinet is to the left of the 14-inch EXTREME Grizzly band saw.) $10.

Wood Teck electric heated wood band applicator. $75.
Swingline Heavy Duty Stapler $15.
Arrow Hammer Tacker: heavy duty; HT-50A. $18.

Incra Precision Measuring tools: T ruler, marking protractor in protective case. $28.
Stanley Square with wooden handle in a wooden case. $10.
Bridge City Brass 6 1/2-inch Right angle Square $50.
Bridge City Brass 3 3/4-inch Right Angle Square $35
Peachtree Radius Gauge. $8
6-foot level $20.
Generic Tap and Die Set. $5.
Generic Tap and Die Set. $5.

Craftsman toolbox 15-inch x 8-inch x 6 1/2-inch. $8.
3Toolboxes. each $10.
Toolbox $4.

Craftsman plastic TOOLBOX STORAGE SYSTEM: 2 removable organizing trays over a large volume storage area good for storing large, heavy tools. Handle for comfortable transport. 21"L x 13"W x 16 1/2" D. $25.

Rockler BENCH COOKIES: complete set of bench top and elevation cookies including metal stand and wooden shelf. (SEE PICTURE) $125.

Dremel tools (2)- each $15.
Dremel Tool Cord Holder. $10.
Dremel Flexible Shaft and Parts (Be sure to take both pieces). $12.
Dremel bench mounted router table. $23.

Flexible Shaft, no key. $4.
Halogen Work Light, 500 watt, portable. $15.
Magnetic work light, regular bulb. $15.
Harbor Freight not quite 520-piece Terminal Assortment. $7.
Harbor Freight Wire Assortment on Rack. $20.
14 gauge/2 NM-B with ground by ESSEX. Guessing approximately 150 feet. $5.
Power Stripes (2): 6 outlets. 5 feet heavy duty cord. each $5.
Speeddial Motor Speed Control for universal (AC DC) series DC motors. For motor nameplate ratings up to 5 amps max, imput 120 VAC, fuse 5 amps, SLO-BLO (SEE PICTURE with Craftsman and Dremel disc/belt sanders #24) $10.

Contour Gauge: for fitting tiles, carpets, joinery work, model making, clay modeling, pattern making, etc. $10.
Tempered Glass Soldering Plate (12-inches x 15-inches) $5.