Creamsicle Fudge {Easy Recipe} - Miss in the Kitchen (2024)

FAQs

Creamsicle Fudge {Easy Recipe} - Miss in the Kitchen? ›

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

Options for what you can do with your unset fudge:

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.

It could be that your fudge is overcooked and this causes the sugar to harden. A sugar thermometer will help you to check it reaches the correct temperature which is the soft ball stage at 112 to 116 °C (234 to 241 °F). If it exceeds this, it is heading for a much chewier consistency.

The main difference between evaporated milk and condensed milk is that evaporated milk is unsweetened while condensed milk is sweetened.

How long do you boil fudge to get to soft ball stage? ›

Too cooked

The result is hard and brittle fudge. To save the fudge, put it in a saucepan with 45 to 60 ml (3 or 4 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil without stirring until the thermometer reaches 114 to 115 °C (237 to 239 °F).

If the temperature is too low, the fudge will be too soft and sticky, and if it's too high, it will turn into a hard, crumbly mess. The ideal temperature to cook fudge is between 232-234 degrees F (111-112 degrees C).

Place the fudge over low heat and slowly whisk in about 1 US tbsp (15 ml) of milk or cream at a time. Keep adding liquid and stirring until the fudge sauce is thick, glossy, and smooth.

To test the boiling mixture for doneness, drop a bit of it into a bowl of cold water. If it forms a ball that is soft enough to flatten between your fingers, the mixture is ready for cooling. When the fudge cools to 110 degrees F/43 degrees C, beat the mixture vigorously with a wooden spoon until it's no longer glossy.

If you have difficulty cutting or if the fudge crumbles with the cuts, try warming the metal knife (or wheel or whatever) in hot water between cuts. Wipe the hot knife dry before cutting. Whatever you use, always wipe the cutting implement clean between cuts.

Principles of quality fudge

The key to creamy, luscious fudge is controlling crystal formation. If the sucrose (table sugar) crystals are small, the fudge will feel creamy and smooth on your tongue. But if the crystals are large, the fudge develops a crumbly, dry, or even coarse texture.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals.

Salt: While some homemade fudge recipes do not call for salt, I find it essential for balancing out the sweetness of the condensed milk.

Fudge is a dense, rich confection typically made with sugar, milk or cream, butter and chocolate or other flavorings. The base for fudge is boiled until it reaches the soft-ball stage (135 to 140 degrees F), then stirred or beaten as it cools to minimize the formation of sugar crystals.